Built for home charging.
Our Evnex E2 combines intelligent features with simple charging, ensuring every charge is quick, clean, efficient, and tailored to you.
Seamless smart features
Driver-centric design
NZ-made quality
Fully-installed from $2,495 $1,995
Charger only from $1,495 $1,295
Smart features for smarter drivers.
The world's thinnest home charger
The 66mm charger comes in four sleek finishes
Home overload protection
Protecting your home during peak periods
During peak periods, such as evenings with all of the family home, dinner in the oven, and the heat pump on, your energy usage may exceed your home's capacity. The E2 will automatically adjust and lower your charge rate, avoiding power supply overload.
Full EV compatibility
Works with all current EVs in Australia
Up to 4x faster than a 3-pin plug
7.4kW (32A, single-phase)
Our single-phase E2 charger can be installed in any home, including homes with two- or three-phase power. Due to some vehicles limiting their charge rate, our E2 charger may be the preferable choice even with a three-phase home.
Dedicated charging app
Track each charge & control your features
Carbon-tracking capability
Track grid generation sources and carbon emissions
We’re the only chargers in Australia that let you see the generation mix of the grid, breaking out the energy you’re using by its source, cleanliness and carbon footprint — allowing you to make informed decisions on when you charge.
Solar export diversion
Divert unused solar energy to charge your EV
Charge scheduling
Tailor your charge with off-peak, free, or clean energy
Make the most of off-peak or free energy rates offered by many energy retailers. Charge your EV overnight when your home’s load is low. Or, look to schedule your charge when grid energy is at its cleanest.
Plugs for all EVs
Available with a 5m or 8m tethered cable
How the E2 stacks up against a 3-pin charger
Evnex E2 charger
Standard 3-pin plug
Charging estimates are based on charging a Polestar 2*
Evnex E2 specs
Reliability meets sustainability
Impact, fire, & UV resistant
Perfect for any installation — indoors or out.
Fully operational from -25°C–55°C
Providing a reliable charge at any extreme
Renewable enclosure
The E2’s enclosure is made of 85% bioplastics
One easy app. Complete control.
Unlock the power of your E2 with the app that lets you charge, save and go green with a tap.
Installing the E2
Our E2 isn’t just designed for simple, smart home charging, but for seamless installation too.
Up to 50% of our customers are eligible for standard installation
Standard installation starts from $1,995 (which includes your E2 charger) — and includes full expert installation, testing and set-up by an Evnex-accredited electrician.
Full expert installation of your E2 smart charger by an Evnex-accredited installer.
Up to 5m cabling between charger and switchboard, with the cable concealed in the roof or floor where possible.
Installation and configuration of home overload protection / solar diversion hardware.
Installation of a dedicated circuit breaker (RCBO) within the switchboard with adequate space.
Connection of charger to the internet, via Wi-Fi or free, onboard SIM card.
Testing and commissioning of your E2 charger, ensuring everything is set up and running smoothly.
Don’t qualify for a standard installation?
We’ll work hard to find a custom installation solution tailored to you by completing a site survey to understand your home and intended set-up better. This may come at additional cost.
See your charging state at a glance
The Evnex E2 will continually communicate its state with the LED lights on the front of the charger. This will change based on the current charge, schedule options, and much more.
Get started smart charging
Contact our team for a free consultation, personalised quote, and expert advice before your purchase.
FAQs
Our E2 starts from $1,495 with either a Type 1 or 2 plug and a 5 meter cable (a longer cable may increase this cost). For a fully installed E2 prices start from $2,495, which includes expert installation, testing, and set-up by an Evnex–certified electrician.
And, for a limited time, we're offering $200 off the E2 charger, and $300 off installation, meaning you could get a fully-installed E2 starting from $1,995.
Installation costs depends on factors such as distance from your switchboard, complexity of your installation, location of parking, etc. Before any fully-installed purchase, we'll assess your installation and provide you a personalised quote for your home. Get a quote here!
All of our chargers — the E2 included — are compatible with all electric vehicle makes and models (bar a very small number of older models). The E2 also comes with options for both Type 1 & 2 plugs.
Our E2 charger provides 7.4kW single-phase power, charging your EV up to four times faster than a standard 3-pin plug — and takes most EVs from 20%-100% battery in an average of 6-8 hours.
The exact speed of your charge of your EV however depends on several factors, such as the model of your vehicle, its battery size, and any built-in charging limitations of your vehicle.
For exact figures, please get in contact with our team who will be happy to help!
Yes, we offer a fully-installed option for the E2 charger throughout Australia. Our network of local, friendly, professional electricians is well-trained on our products and can offer expert advice on all of your charging needs.
Following your installation, we'll provide ongoing support — whether you're an EV driver, business owner, or fleet manager.
Got a question or need advice?
Get in touch with our local support team of electricians, engineers, and all-around EV experts.
Need urgent product support?
Please email support@evnex.com or call 1800 959 377.